Friday, March 2, 2012

Three Tips For Flyer Design


Three Tips For Flyer Design

Here are three sure-shot tips for your flyer designs to assist in you in marketing your products and services effectively.
1. Start with your concept
You should not start any flyer printing project without knowing what message or messages you are trying convey. What aspect of your business are you trying to communicate? What benefits are you offering your customers that you are expressing through your flyers? What specials or sales (if any) are you going to be promoting? You also want to know what types of customers you are targeting with your flyer campaign. Determine what your message is, and who will be most affected by that message. This will have a tremendous impact upon your overall flyer printing project.
2. Make it eye catching
No matter how great your message is, and how defined you have made it, it will not work if you do not make your flyers attractive. Try to think of what images and colors and words you can use to make your flyers stand out. Your flyers need to be aesthetically pleasing and as unique as possible. Obviously, there is only so much you can do while staying within the definition of a flyer, but try to be as creative as possible. Make your flyers stand out from the rest.
3. Emphasize your selling points
In the first step, you should have considered some of the benefits that you can offer your customers. Make sure those are the points that you emphasize in your flyers – and all of your advertising efforts for that matter.
This is not the same as identifying your concept. Your concept will be the primary message that you are going to convey with your flyer. Your selling points are the ways in which you are going to express that message. Make a big deal out of your business’s main advantages. If you offer lower prices, emphasize that. If you have faster service, make that the focus of your flyers. If your products are of a higher quality than others on the market, use that as your primary selling point.
These tips are meant to get you started in designing your flyers. If you follow these tips, you should be well on your way to making a productive marketing flyer for your company. Still, there are a lot of things that go into making a good flyer. You should constantly evaluate (and re-evaluate) your flyers and their effectiveness. If you see an aspect of your flyer campaign that is not working the way you would like, ditch it and try something else.
On the other hand, take the things that are working and build upon them. If you work hard and continually try to improve, you should eventually have a flyer campaign that increases the revenue for your company.

    3 Rules to Follow in Your Logo Design


    Understanding the Web Design Process

    Understanding the Web Design Process
    A good way to understand the web-design process is to understand it through a case study. In this article, I will present the case study of Jake, a busy web developer, as he works with a client to create a small web page.
    1. Gathering Design Requirements
    Jake has a new client, an import and export agent. The agent needs a simple web site to give her brief background and details of the services she provides. After an initial meeting with Dianne, the real estate agent, Jake grabs a pencil and sheet of paper, and he starts creating rough sketches of the home page. He draws a number of different layouts and then picks the three designs that he thinks will work best, given Dianne’s needs. He meets again with Dianne to discuss the three designs. Dianne selects one of the sketches and makes some suggestions. When Jake brings up colors, Dianne decides on a color scheme of green, gold, and white because these colors are similar to the ones on her business card.
    2. Photoshop Mock-ups
    Later that day, Jake sits down at his computer, fires up Adobe Photoshop, and quickly mocks up the home page using the finished sketch and Dianne’s preferred colors as his guide. He grabs a few royalty-free stock images from a stock photo site and places them on the mock-up. He spends a little time looking at various shades of greens and golds until he gets something he likes. Once he’s done, he exports the document and sends it off to Dianne to get some feedback.
    After waiting a week, Jake calls up Dianne to get her opinion on what he’s done so far. She tells him she’ll take a look at it when she gets back from her vacation in a week.
    3. Coding Time
    Another week goes by, and Jake finally gets a call from Dianne. She says she likes how it looks, and she wants to move forward. Relieved, Jake fires up his trusty text editor and begins the transition from mock-up to web page.
    Jake begins by creating a simple HTML document that defines the structure and content for the page. Next, he uses Photoshop to slice up his mock-up so he can extract the banner graphics and other images, which he then inserts into the HTML document. Next, he carefully codes corrresponding CSS to pull the whole thing together. The style sheets transform the linear-page skeleton into a brightly colored, two-column layout.
    Jake opens up the new web page in Mozilla Firefox, and everything looks great, just like his mock-up. He then fires up Internet Explorer 6 and winces at the ugly page staring back at him. Fortunately, Jake has seen this kind of thing before, so he quickly throws in a few extra style definitions in an IE-only style sheet. Presto! He’s ready to show Dianne the finished page.
    4. Ready to Go
    Dianne loves the site, and Jake is ready to start building the rest of the pages for the site. Now that Jake has worked out the colors, the images, and the style sheets, it will be easy to produce the rest of the site. Jake can take pride in the fact that he’s made his new client happy.
    5. Ideal Situation
    Jake got lucky this time. He got an easy and laid back client. The thing is, clients are usually not so easy to please in the real world. For that, you should be able to demonstrate technical knowledge and have effective communication skills to reply to client’s tough queries and be able to convince them.

    What exactly is clip art? Can you use it in your logo? How about some stock art?





    What exactly is clip art? Can you use it in your logo? How about some stock art?

    Ah yes. Clip Art. Under the right circumstances, a great time saver. If you’re looking for budget logo design, pretty darn cheap too. Usually free. And when is it the right circumstances to use a piece of clip art as your logo? That would be never. Clip art is such an incredibly bad idea for your brand, it almost defies description. Not that you can’t find a piece of clip art that would be suitable for your logo – you probably can. Truth be told, there are some amazing libraries of pre-fab art lying around. One misconception that people have is that this kind of material denotes some form of visual style (as in “eewww, looks like clip art”). That’s not entirely true. Whether something is, or isn’t clip art, has very little to do with how it looks. It has everything to do with how it’s distributed. Clip art is material that’s designed to be used by a whole lot of people, each of them having limited ownership rights to do so. Sometimes there are even usage restrictions, often to do with commercial and non-commercial reproduction.
    Who owns the rights?
    No-one owns the image outright, so that any clip art image is unencumbered with copyright issues when a lot of people use it. Does that sound like a good idea for a logo? (also sounds very similar to so-called logo templates). You can’t own it, you can’t claim exclusivity, and an untold number of other companies are utilizing the very same image. Yes, maybe even your direct competition. Using a piece of clip art as your logo is probably infringing on a copyright (that’s bad) as it’s very rare that the licensing arrangements with the original designer allow for it (Microsoft clip art is a prime example of this. It’s given away with a ton of software, but the licensing is so restrictive it’s pretty well unusable for any commercial use whatsoever. Probably okay to use the artwork to advertise your church picnic. Not so okay to slap the artwork on a flyer advertising your latest ‘blow-out’ sale). Bottom line? Don’t do it.
    What exactly is ‘clip art’?
    To designers, the term clip art refers to an image or design that can be found in clip art libraries and is available for use over-and-over again, for a multitude of people. The term ‘clip art’ doesn’t refer to the quality of the work – it’s not a matter of’ ‘how good it looks’ but rather ‘what it is’. There is some exceptionally good clip art available and just because we don’t technically use scissors (that’s the ‘clip’ part) designers understand that downloading a prefabricated icon, template logo or illustration from a website doesn’t change the fact that such material is still defined as clip art. As long as we understand what it is, and the limitations thereof, there’s nothing particularly wrong with clip art. Clip art – even of the digital variety – has been the savior of many a designer in times of deadline crunch.
    What does clip art ‘look like’?
    Clients, on the other hand tend to refer to something being ‘clip art’ as how the artwork appears visually to them. But what does clip art ‘look like’? If I was to try and define ‘clip art’, I’d probably point out to the ubiquitous line-drawings of people performing various tasks around offices that have been featured in flyers for eons. As these images have been for eons, they’re dated and tired, both in fashion sense of the characters, and office hardware depicted. Stylistically, the line weights are uniform (as opposed to varied line thicknesses which give any illustration a nifty look) and that’s probably as close as I can get. But even then, I’m probably pointing out this clip art because I’ve seen it thousands of times, I’ve been in the field long enough to remember the huge books of clip art that these images were snipped from. It wouldn’t be because I’m a master at recognizing clip art-at-glance. So what do clients mean when they say “meh – that looks like clip art”? No small question. Without a very clear answer.
    The perception of ‘value’
    To a client, the term ‘clip art’ does refer to ‘how it looks’ and is usually a phrase that they will use when – in their mind – the design presented does not appear to have taken the amount of time that they believe they have paid for. Nor the amount of attention they feel their new corporate identity is due. Often, this criticism is due to a misunderstanding of what a logo design is, or rather, should be – the personality of the company pared down to a (relatively) simple graphic. It’s also due to a fundamental misunderstanding of what ‘clip art’ is. I’ve often said that if we lived in an alternate universe, and the Apple and Nike logos were yet to be invented, and we were to present either of these now-celebrated designs to a client, they’d quickly dismiss them out-of-hand, no doubt with a ‘looks like clip art’ critique. A complex, illustrative logo ‘looks’ like it took time and effort. Simple logos often don’t. An eloquent logo makes the logo design process look easy. I might even appear that it took a few minutes to put together. Never mind the concept, the roughs, the sketches and doodles that went into it (see a case for simple logos for an example of this). Thus the dreaded ‘clip art’ comment. You see, it’s all about perception and the perception of ‘value’. While complex logos appear to have taken an awfully long time to develop, simple logos ‘look’ like they could have been rendered quickly using desktop design software (and the supposed miraculous ‘design this’ key).
    Time is NOT a factor in determining what ‘clip art’ is
    Rather than what clip art is, some clients view ‘clip art’ as what they believe is the amount of time a designer spent on their funky new logo. It should go without saying that the amount of time spent on a logo shouldn’t be a factor in how effective it is. I’ve seen great logos that took a few hours to conceptualize and render. Neither can be described as clip art which remains, a term used to describe pre-fab artwork that is created with the sole purpose of being used by multiples of people, either as a standalone piece, or incorporated into another piece with text and/or graphics.
    Using clip in your logo?
    Understanding what clip art is, we can now turn our attention to its use as, or part of, a logo design and whether or not you should consider it. Don’t. Using clip art in a logo defeats the entire purpose of having a logo in the first place. Using clip art in your logo is, for all intents and purposes, the same as copying someone else, without the legal hassles that might come with a more blatant copy. Also, many clip art collections have stringent terms of service and most pre-emptively nix the idea of using it as part of any logo or image that is to be trademarked. In fact, most clip art collections, while ‘royalty free’ continue to hold the rights to their work and legally let you ‘borrow’ it for a fairly limited range of uses – usually excluding as your new logo.
    Stock art in your logo? Probably not a good idea
    There’s a lot of stock art websites to be found on the internet. Most of them offer astonishingly high-quality artwork for a surprisingly low amount. The idea behind stock art is that the volume of buyers all added up, ends up equaling the amount that would have been paid for a custom illustration, design, graphic or icon set. Fair enough. While a lot of the design community frowns upon this as being ‘spec work‘ (ie: design work committed in the ‘hope’ of getting paid sometime down the road), I’ve been somewhat non-plussed by the whole thing. True, a paying gig is better, but despite the sheer volume of choices, I’ve always had a hard time finding exactly what I’m looking for. I often find myself reverse engineering my concept into whatever stock art (usually photos) that I’ve found, rather than the other way around. Stock photography can go wrong too. In any case, the quality level of some stock art website is extremely high. So, what about using some of this great stock art as a logo? Uh-uh. Unless expressly licensed FOR use in a logo (istock recently announced that they were launching a stock logo service this year, as did contest site 99designs) almost ALL stock art sites expressly forbid the use of their material as a logo, trademark or service mark. In order for their stock art business model to work, they need to maintain ownership rights to their artwork, and letting companies use their material as part of a logo would lead to a lot of licensing and ownership confusion (stock art is an ongoing issue with crowdsourcing sites). Long and short of it – it’s never a good idea to use stock art (unless the owner tells you specifically that you can) for your new company logo. Or the material is specifically designed with branding in mind and offers exclusive rights buyout. See our Logos in a Box section on stock ready-made logos for more information.

    Keep Your Logo Simple

    Keep Your Logo Simple

    Have you ever seen a logo that looked like a jumbled mess of drawings? Where there are so many elements competing for your attention that you don't know where to look or what it all means? Or where there are so many layered elements that they're all confused together?

    The job of your logo is to communicate what your business is all about in an instant. But if you try to say too much in that instant, it's more likely that your clients and prospects will either not get the message at all or that they'll get the wrong message—and wind up pulling the wrong information out of an overcomplicated logo.


    The way to avoid confusing your clients with your logo is simple: to just keep it simple. Just like the KISS principle.


    Wikipedia says: "The KISS principle (acronym for "Keep It Simple, Stupid") states that design simplicity should be a key goal and unnecessary complexity avoided. It serves as a useful principle in a wide array of disciplines, such as software development, animation, journalism, photography, engineering, and strategic planning."


    And, let me add here—it applies in brand design as well.


    So, how do you keep your logo simple?


    There are a few easy steps to creating a clear, simple logo that communicates your message to your audience instead of confusing it.


    1. Keep the brand story that you're telling with your logo simple and don't try to say too much.


    Your logo should tell the story of your business's brand. Your business's story is made up of four parts:

    • Your business's personality
    • The type of services or products you offer (either by talking about what you do, or better yet, showing your customers the need you can fill or the problem you can solve)
    • What makes you different from your competition
    • Who you can best help
    When you sit down to create your business's story, you'll probably find that you have a lot to say about these four story parts. And the details will probably be complex and involved.
    So, the next step in creating a logo is to take your story and scale it back to one, or possibly two, main ideas that you want the viewer—your potential client—to see in your logo.
    This simplified story is the key to making sure that your logo will be able to be designed in a simple way. If you're trying to tell a complicated story, then your logo design will probably need to be complicated to communicate everything. But if your story is simple, then your logo can be simple as well.
    2. Keep the design of your logo simple—don't include too many details in the icon.
    A logo that contains a lot of visual elements may turn out to be too complicated to allow viewers to assimilate all of the information at once. Keep the number of shapes, lines and other design elements at a minimum to make the logo as clear and clean as possible.
    Limiting the number of elements and keeping them all at the same relative level of detail to each another makes it likely that you'll end up with a logo that's also scalable. If you include too many design details, it's more likely that when you scale the logo down, some design elements will be too small to see or distinguish from one another or even to print well. Simplifying the design of your logo can help to ensure that it will be scalable.
    3. Keep the icon and the name of your company separate.
    If you layer your company's name on top of the icon in your logo, then your company's name can be harder to read. And if you have text on top of the icon, it will be harder to see the icon, much less grasp what it means. Separating these two elements from one another will make them both easier to read and understand.
    Just following these three simple recommendations can help you to create a logo that keeps it simple—and helps you to communicate with your clients instead of confusing them.


    Thursday, March 1, 2012

    he Birth of Design for Testability

    he Birth of Design for Testability


    Slowly, over the last four decades, industry has gradually begun to give Design for Testability the attention it truly deserves. This concept was originally pioneered by Ralph De Paul, Jr. in the mid 1960’s based on diagnostic ideas that he had developed in the 1950’s. At that time, industry was not yet receptive to the idea of implementing within the design process, new techniques oriented solely toward improving the testing and “troubleshooting” of a device or system. During its first two decades, Design for Testability remained largely an “outsider” discipline, accepted only by a relatively small group of industry experts, until the idea finally began to take hold in the mid 1980’s.

    The Initial Two-Decade Investment

    In the 1960’s and early 1970’s, De Paul—who would later found DETEX Systems (today’s DSI International)—began pushing for innovative ways to assure our servicemen of dependable equipment in the field. Recognizing that this was best insured during the design process, De Paul developed a way of representing design functionality as a causal model in what he called Design Disclosure Format, or DDF (later to be known as a dependency model). With DDF, Maintenance Dependency Charts (MDCs) were developed to improve troubleshooting and equipment maintenance. The DDF approach would prove to be equally effective for electronic or non-electronic systems. Emerging from this process in the mid 1960’s was military standard MIL-M-24100, co-developed by Ralph De Paul and the first precursor to future Testability standards. A careful study of this initial standard would reveal that at its core was a design description format that was nearly identical to the format used by LOGMOD—DSI’s first commercially available Testability and Maintenance tool.

    With LOGMOD enjoying continual field successes through the late 1970’s, United States Department of Defense studies were conducted and William Keiner (US Navy) sought out DSI and Ralph De Paul to bring this need for Testability analysis before the U.S. congress. Keiner visited DSI on numerous occasions and was ultimately credited with authoring MIL-STD 2165, the first recognized “Testability” standard. This document, however, was heavily influenced by the ideals, techniques and writings that De Paul—ever the diagnostic evangelist—had freely shared with Keiner during this period.

    As a result of DSI having been intimately involved in the initial “push” of MIL-STD 2165 (now, MIL-HDBK 2165), DSI was also instrumental in the development of MIL-HDBK 1814, the Integrated Diagnostics standard. The purpose of this document was to better define the broadening scope and diagnostic responsibilities of all contributing parties, both those involved design and support activities. This was the era where Design for Testability began to branch into additional areas and the multitude of design and support disciplines began to coalesce into a more unified diagnostic engineering process that was better suited to evaluate diagnostic performance and support objectives during the design phase of large scale complex programs.

    Riding on the Shoulders of Giants

    In 1993, IEEE recognized Ralph De Paul by posthumously awarding him the John Slattery award for his contribution to diagnostic engineering, referring to him as “The Father of Testability”. Throughout the 1990’s and early 2000’s, however, DSI continued to push industry to strive towards higher levels of commitment to Design for Testability. Industry experts remained in contact with DSI and, when the IEEE began to develop its own standard on testability and diagnosability, Eric Gould (DSI’s current subject matter expert) was recruited to aid in its development. As a member of the Diagnostic and Maintenance Control subcommittee of IEEE SCC20, Gould was heavily involved with the writing of this standard—not only drafting the metrics section of the document, but also participating in the ballot resolution process.

    The resulting IEEE Std 1522 (2004) is a document that provides a formal basis for the analytical component of the Design for Testability process. Ultimately, this standard was not only the result of years of collaborative effort by many of the most resume-rich and well-known subject matter experts in the field, but the strict ballot resolution process required by the IEEE ensured that the standard withstood the “test of fire” as it was reviewed by members of the Design for Testability community at large. Because the metrics defined within this standard were intended to be applied within a wide variety of domains, care was taken not only that the metrics were computationally precise, but that the definitions were sufficiently general to ensure universal applicability. This awareness of the full spectrum of concern is one of the areas in which this document differs from many of the more provincial descriptions of the testability process that can be found by searching the Internet.

    Defining Testability

    Design for Testability is not an endeavor solely owned by the chip, board or software test ambassadors—although these segments of industry oddly appear to believe that the Design for Testability process is peculiarly theirs. Many of the definitions of testability or Design for Testability that can be found on the Internet are extremely narrow, funneled towards the low-level testing methodologies performed for circuit or software test. Furthermore, many of these definitions are closely associated with specific test methodologies (JTAG, Boundary Scan, etc.) that imply that their intended domain is only low-level, electronic-specific or software test applications. It is hard to imagine how designers of fuel systems, radar arrays, military vehicles and communication satellites—to name just a few of the many system technologies to which Design for Testability must be contractually applied—could find a use for the process described in the provincial definitions that are becoming alarmingly widespread.

    Moreover, excessively low-level descriptions of the benefits of good testability usually result in a mis-connect when engineers attempt to sell Design for Testability to management. It is important that the process be described in terms that are general enough to encompass the various benefits in all of the disciplines (Maintainability, Safety, Supportability, etc.) that it is ultimately Design for Testability’s responsibility to sustain. It is beyond the scope of this paper to propose a new definition of testability—especially since there are plenty of serviceable definitions already afloat that may serve as excellent starting points. One could do worse than to begin with the extremely (and intentionally) general definition served up in IEEE 1522:

    Testability: A design characteristic that allows its operational status to be determined and the isolation of faults to be performed efficiently.

    We could then hazard the following, equally general definition of Design for Testability:

    Design for Testability: The aspects of the product design process whose goal is to ensure that the testability of the end product is competently and sufficiently developed.


    3D Prototype Mock up in Adobe Illustrator


    3D Prototype Mock up in Adobe Illustrator



    When producing packaging design, how can you tell how your design will look on a product unless you test it?
    One way of seeing whether packaging design is effective or not is to create a prototype. This would normally consist of printing the design out and mocking it up – this is costly and expensive to do, and normally only one prototype would be produced. What if prototypes could be mocked up in a fraction of time, be less expensive and messy, and be more environmentally friendly? What if multiple prototypes could be produced to show a client what their products would eventually look like in mass on a shelf?
    Welcome to this tutorial which will show you how to use Adobe Illustrators 3D feature to mock up prototypes. For this example we will be mocking up a label for a pill container but the techniques used can work for many things including box packaging.
    main

    Step 1 / The Label

    Firstly you need to produce your label design. Here is ours below:

    1
    To prepare this artwork to be able to be wrapped around a 3D object we need to make it a Symbol. First select the label and outline all the text (hot keys command + shift + O). Then select the artwork using the selection tool (hot key V). Get the Symbols pallet up (Window > Symbols). Drag the artwork into the pallet. A dialog box will appear allowing you to save the artwork as a symbol.
    2
    The artwork is now ready to be mapped onto a 3D object.

    Step 2 / Preparing your 3D object

    Now we need to create the packaging object upon which the label will sit. Use the “Rounded rectangle tool” from the tools pallet (note: by default the rectangle tool will be highlighted – click and hold on this and a menu will expand which will allow you to select the rounded rectangle tool). If you click (don’t click and drag) on your art-board with this tool selected you will find a window will appear giving you the option to define the radius of the rounded corners. You can also select the dimensions you wish to use. Alternatively click and drag on the art-board to create your shapes.
    31
    Using this tool create your pill container by drawing the relevant shapes. One you have them use the tools in the “Align” pallet (hotkeys shift + F7) to center, or ‘horizontally align’ them.
    4
    We are now going to group these separate shapes and make them one single shape. You do this by using the tools in the “Pathfinder” palette (hotkeys Shift + Command + F9). Select the shapes using the selection tool (hot key V) and then in the “Pathfinder Palette” select the first icon on the left “add to shape area” then click “expand”.
    5
    Now we have our basic shape but we need to get this ready for being made “3D”. To do this we need half of this shape. To create this draw a rectangle using the rectangle tool which can be found in the main tool pallet (hot key M). Click and drag on your artboard to produce a shape and position it over half of the pill container shape we have just created. Then select both shapes using the selection tool (hot key V), go back to the “Pathfinder Palette” and select the 2nd option on the left (Subtract from shape area).
    6
    We now have a shape, ready to be made “3D”. But before we go onto that step there is one last task to do – we now need to divide our shape to allow us to colour the lid, the label and the main body of the pill box. To do this use the pen tool (hot key P) and draw horizontal lines across the pill container where the label and lid will sit. To use the pen tool click to the left of your shape, on the artboard where you wish to make your first segment – this will create your first “node” – then hold shift and click on the right hand side, this will create your second node. Now hold command and click onto the artboard to deselect the line you have just drawn and repeat the process. By holding down shift you will keep the line exactly at 90 degrees. See the example below:
    7
    Now select the lines and the shape using using the selection tool (hot key V) and hit the “divide” option on the “Pathfinder Pallet”. This will divide the shape into sections.
    8
    Use the “Direct selection tool” (hot key A) and click and drag over the inner vertical lines. Press the delete or backspace key on your keyboard. You can then go in an colour the different segments as you desire (it is also possible to make them partly transparent if you want – so as to create the illusion of glass). This tidies up the shape and makes it ready to be taken into the third dimension!
    9

    3. Bringing it all together into your 3D prototype

    Select your shapes using the selection tool (hot key V) and group them (hot keys Command + G). Now go to “Effect > 3D > Revolve”. This will open a window giving you options to make your object 3d. If you press “Preview” you will be able to see what your object looks like in 3D. (If the revolve seems to be inside out ensure that that you select “Right edge”).
    10
    When you have obtained the angle of the shape you desire click on the “Map Art” button. This will bring up another window. You will need to find the relevant surface you want your label artwork to be mapped onto. Once you find it select the label symbol from the drop down and position into place (ensure you select the “Shade Artwork” option for a realistic effect). Press ok., then make any rotation amends as may be required and then press ok again.
    11
    And there you have it – your own prototype. If you can master this technique you will be able to do it in around 15 minuets – something which might have taken an hour if you were to have printed it, cropped it and stuck onto a real pill container. You can also duplicate the shape and develop examples of how multiple pieces would look together! Enjoy!
    12